Rs Ba1 Full Download

Home > Support > Download Database > Amateur > Base stations > RS-BA1. RS-BA1 Downloads. Name, Type, Size. Product Brochure. RS-BA1 Product.

• rs- ba1 remote control software quick reference guide. • Setting up Port Forwarding.. 5 Setting up the RS-BA1 Remote Utility Software for the Base Station. 8 Connection Errors.. 1 6 Setting up the RS-BA1 Remote Control Software. • A Router for setting up Port forwarding (Linksys RV042 being used in our documentation and is in no way being recommended) Desktop Computer that will always remain connected to the Router that is also being used by the Icom radio. This router should be connected directly to the Internet.

• The Windows operating system includes a Firewall setting as standard; this is the security function that can prevent improper access through the Internet. To let the Remote Utility work properly, add it as an exception in the Firewall In the “Allowed programs and features”. • Finding the IP of your Base Station Computer 1. In the Command window, type “ipconfig”. Press Enter on your keyboard. Record your computer’s IP address. You will need this information later while setting up the RS-­‐BA1 software.

In the following example, the Base Station computer’s IP is 192.168.3.106 Setting up Port Forwarding 1. Log into your router. The Linksys RV 042 is shown for example purposes only. Enter RS-­‐BA1 in the Service Name field. Select UDP in the Protocol field.

Enter the Port Range from 50001 to 50003. Click Add to List. Once you see the RSBA 1 in the list, click Update this service. Select the RSBA1 UDP port in the Service field. Enter your Base Station’s Computer IP in the IP Address field.

Click the Enable Checkbox. Click Add to List. After your see the RSBA1 ports forwarding box, Click Save Settings. Setting up the RS-BA1 Remote Utility Software for the Base Station 1. Open the RS-­‐ B A1 Remote Utility Software. Select Network Setting. Enter your Computer’s Name in the PC Name field.

Choose FTTH in the Internet Access Line field. Close (exit) the RS-­‐BA1 Remote Utility software and open it again. Select Server Setting. Click the User List tab. Major league baseball 2k12 wii. Enter your User ID and password 10.

Click the Administrator Checkbox 11. Record/save your user ID and password for future reference. Click the Radio List Tab. Enter your radio name in the Radio Name field.

Click the CI-­‐V checkbox and enter your CI-­‐V address in the Address field. This information is available in the Instruction manual for your radio or in the Set Mode window. Select your Username from the Radio User Permission box and click Permit.

When you see your Username in the Permitted Users field, click OK. When using a USB connection between your computer and Icom radio, Click Auto for COM Port/Audio Setting. When setting a COM port manually, click the Manual Checkbox and select your COM Port in the COM Port. When using a USB headset/mic, select your headset under AF Input / MOD Output Device. Your computer should auto detect your speakers. Click the Radio List tab and you will see your radio.

Select your radio and click Connect. Click OK on the Remote Utility Box (Com port number can be looked up in the Device manager). • Are all cables plugged in the correct connectors?

Check that all devices are powered. The firmware on your Icom radio should be current and that supports the RS-­‐BA1. Reboot your computer, sometimes the COM Port (regular and virtual) requires a PC reboot for complete.

Verify that the Remote Control software is turned Off. Click Option and select Connect Setting CLICK 17. At the Connect Setting window, click Model and select your radio (verify the revision number).

Click Remote Utility and select your radio. Click COM Port to select your port 6. Enter the address for your model radio in the CI-­‐ V address (Radio) field. Turn the Remote Control Software on. Wait for the software to change its frequency. • The following steps are for the Remote Base Station computer only.

Click Server List. Enter following information: Enter your Computer Name Enter your Base Station Network global IP* Enter your User name and Password**. You have now created a Server on your Remote computer to talk to your Base Station network. Select Server List.