Kyocera Fs-1370dn Driver
Classic and KX XPS driver (certified and signed by Microsoft). 1.1.1321 / 1.0.3510, 16.60 MB, XPSDrv_FS-1370DN.zip. Classic KPDL / PCL5 Driver (certified.
• FS-1370DN ADVANCED OPERATION GUIDE. • Contents Paper Handling.1-1 General Guidelines.1-2 Selecting the Right Paper.1-4 Paper Type.1-11 Using the Operation Panel.2-1 General Information.2-2 Understanding the Operation Panel. 2-3 Using the Menu Selection System.2-8 Report Print. • Introduction Regarding Tradenames PRESCRIBE is a registered trademark of Kyocera Corporation. KPDL is trademark of Kyocera Corporation.Hewlett-Packard, PCL, and PJL are registered trademarks of Hewlett-Packard Company. Centronics is a trade name of Centronics Data Computer Inc.
Adobe, Acrobat, Flash, and PostScript are registered trademarks of Adobe Systems Incorporated. • Conventions in This Guide This manual uses the following conventions. Convention Description Example Italic Used to emphasize a key word, Refer to Configuration Tool on page 3-9. Typeface phrase or reference to additional information. Bold Used to denote buttons on the To start printing, click OK. • Paper Handling This chapter explains paper specifications for this printer General Guidelines Selecting the Right Paper Paper Type 1-11 Paper Handling. • General Guidelines The machine is designed to print on standard copier paper, but it can also accept a variety of other types of paper within the limits specified below.
Note The manufacturer assumes no liability for problems that occur when paper not satisfying these requirements is used. Selection of the right paper is important. • Minimum and Maximum Paper Sizes The minimum and maximum paper sizes are as follows.
For the paper smaller than JIS B6, postcards, and envelopes, the MP tray must be used. Movie magic budgeting license number. Paper cassette MP tray Minimum Minimum Paper Size Paper Size 105mm 70mm (4-1/8 inches) • Selecting the Right Paper This section describes the guidelines for selecting paper. Condition Avoid using paper that is bent at the edges, curled, dirty, torn, embossed, or contaminated with lint, clay, or paper shreds. Use of paper in these conditions can lead to illegible printing and paper jams, and can shorten the life of the machine. • Basis Weight Basis weight is the weight of paper expressed in grams per square meter (g/m²).
Paper that is too heavy or too light may cause feed errors or paper jams as well as premature wear of the product. Uneven weight of paper, namely uneven paper thickness may cause multiple-sheet feeding or print quality problems such as blurring because of poor toner fusing. • The moisture content of the paper varies with the relative humidity in the room. When the relative humidity is high and the paper absorbs moisture, the paper edges expand, becoming wavy in appearance.
When the relative humidity is low and the paper loses moisture, the edges shrink and tighten, and print contrast may suffer. • Special Paper The following types of special paper can be used: Paper type to be used Paper type to be selected Thin paper (60 to 64 g/m²) Vellum Thick paper (90 to 220 g/m²) Thick Colored paper Color Recycled paper Recycled Overhead projector transparencies Transparency. Illuminati card game full deck download. • Label paper has a structure comprising of three layers, as shown in the diagram.
The top Top sheet (white sheet is printed on. The bond paper) adhesive layer consists of Adhesive pressure-sensitive adhesives. The carrier sheet (also called Carrier sheet the linear or backing sheet) holds the labels until used. • Envelopes Up to 5 envelopes can be loaded at a time. Envelopes should be fed in the face-up position, right edge first. Since the composition of an envelope is more complex than that of ordinary paper, it is not always possible to ensure consistent printing quality over the entire envelope surface.
• Recycled Paper Select recycled paper that meets the same specifications as the white bond paper except for whiteness. Refer to Paper Specifications on page 1-2. Note Before purchasing recycled paper, test a sample on the machine and check that the printing quality is satisfactory. 1-10 Paper Handling. • Paper Type The printer is capable of printing under the optimum setting for the type of paper being used. Setting the paper type for the paper source from the printer’s operation panel will cause the printer to automatically select the paper source and print in the mode best suited to that type of paper.
• 1-12 Paper Handling. • Using the Operation Panel This chapter contains explanations on the following topics: General Information Understanding the Operation Panel Using the Menu Selection System Report Print 2-11 USB Memory (USB flash memory selection) 2-16 Counter (Viewing the counter value) 2-18 Paper Settings 2-19 Print Settings 2-28. • General Information This chapter provides the information you need to configure the Ecosys printer. In general you need to use the operation panel only to make default settings. You can make most changes to the printer settings using the printer driver through the application software. Note Changes to printer settings made using a software application override changes made using the operation panel.